Exergy-based techno-economic and environmental assessments of a proposed integrated solar powered electricity generation system along with novel prioritization method and performance indices

Abstract

This study focused on the two important gaps in the literature. The first is solar energy- powered electricity generation in a more economical way via the integration of flat plate solar collector (FPSC) an Organic Rankine Cycle (ORC) and an absorptional heat transformer (AHT) system. Another gap is advanced exergy analysis of the AHT cycle/ORC process based on renewable energy integration to reveal clues for improving the system. To close these gaps a novel system including a lithium bromide AHT cycle-ORC with a FPSC system application was proposed in this study. In this proposed system the temperature of the heat source for the ORC system was upgraded via an integration of the AHT and FPSC cycles. The main components of the AHT cycle are the condenser (ABScon) refrigerant cycle pump (P1) evaporator (EV) absorber (ABS) solution heat exchanger (SHX) absorbent cycle pump (P2) expansion valve (V) generator (Gen) ORC turbine (ORCT) and ORC condenser (ORCcon). To demonstrate the electricity production from solar energy in a more economical way thanks to the proposed system a comparison was made with similar-scaled existing solar power plants. The results supported the main purpose of this study. The annual electricity production with the proposed system was calculated as 2601 MWh with initial investment cost and payback period values of US$3.924 million and 4.531 years respectively. The conventional and advanced exergy exergoeconomic environmental impact and sustainability analyzes were also performed. Based on these the novel performance parameters and prioritization method were proposed to assess the improvement potential of the system. The results indicated that SHX and FPSC had the highest exergy destruction rates (EDRs) of 23.711% and 21.849% over 5853.89 kW due to the stronger thermal and chemical reactions. Similarly Gen FPSC and SHX had the highest ED cost rates (CRs) of 67.59% 59.09% and 47.98% respectively. Gen V and ORCcon were higher contributors to the exergy destruction rates of almost all the components. However these showed an adverse manner for irreversibility activities. So the temperatures of Gen and ORCcon should be optimized carefully. ABScon P2 P1 ABS Gen ORCT and ORCcon had high development priority to improve the whole system.