Taymaz TabariMehdi EbadiDheerendra SinghBaşar Ca̧ǧlarM. Barış YağcıYagci, M. BarisTabari, TaymazEbadi, MehdiSingh, DheerendraCaglar, Basar2025-10-062018092583880925-83881873-466910.1016/j.jallcom.2018.03.3962-s2.0-85044924279https://www.scopus.com/inward/record.uri?eid=2-s2.0-85044924279&doi=10.1016%2Fj.jallcom.2018.03.396&partnerID=40&md5=a115a933b393a037474faec769c4d9e5https://gcris.yasar.edu.tr/handle/123456789/9551https://doi.org/10.1016/j.jallcom.2018.03.396The photoelectrochemical activity of PbTiO<inf>3</inf> (PTO) for water splitting was studied by linear sweeping voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) techniques. The nanohydrolytic sol-gel method was used to synthesise a crystalline PbTiO<inf>3</inf> perovskite nanoparticles. The physical and chemical properties of nanoparticles such as crystal structure surface area reducibility band gap energy particle morphology and size surface composition and valence states were investigated by X-Ray diffraction (XRD) BET temperature-programmed reduction (TPR) UV diffuse reflectance spectroscopy (UV-DRS) high resolution scanning and transmission electron microscopy (HR-SEM and HR-TEM) along with X-Ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). PTO nanoparticles showed pure crystallinity high surface area (14 m2/g) and high oxygen mobility. PTO has band gap energy of 2.66 eV which makes it active under visible light irradiation. Moreover nanoparticles vary in size and create a core-shell structure in a way that small particles surround large particles. The core-shell structure along with a free defected sites on the surface results in high photoelectrochemical activity for water splitting reaction. The I–V curve revealed that the PTO nanoparticles are a p-type electrode with the photocurrent efficiency of ≈19%. This suggests that the photoelectrode does not require external bias to initiate the water splitting and the reaction can be initiated simply by making a connection between the anode and the cathode. In addition a great stability is observed for PTO electrodes during the reaction as evidenced by no leaching to the reaction medium. © 2020 Elsevier B.V. All rights reserved.Englishinfo:eu-repo/semantics/closedAccessNonhydrolytic Sol-gel, P-type Electrode, Perovskite, Photoelectrochemical Activity, Visible Light Active, Crystal Structure, Crystallinity, Electrochemical Impedance Spectroscopy, Electrochemistry, Electrodes, Energy Gap, High Resolution Transmission Electron Microscopy, Lead Titanate, Light, Morphology, Nanoparticles, Perovskite, Photoelectrons, Photons, Scanning Electron Microscopy, Shells (structures), Sol-gel Process, Sol-gels, Spectroscopy, Ultraviolet Photoelectron Spectroscopy, Uranium Metallography, X Ray Photoelectron Spectroscopy, Non-hydrolytic Sol-gel, P-type, Photoelectrochemicals, Physical And Chemical Properties, Temperature-programmed Reduction, Visible Light, Visible-light Irradiation, Water Splitting Reactions, Vanadium MetallographyCrystal structure, Crystallinity, Electrochemical impedance spectroscopy, Electrochemistry, Electrodes, Energy gap, High resolution transmission electron microscopy, Lead titanate, Light, Morphology, Nanoparticles, Perovskite, Photoelectrons, Photons, Scanning electron microscopy, Shells (structures), Sol-gel process, Sol-gels, Spectroscopy, Ultraviolet photoelectron spectroscopy, Uranium metallography, X ray photoelectron spectroscopy, Non-hydrolytic sol-gel, P-type, Photoelectrochemicals, Physical and chemical properties, Temperature-programmed reduction, Visible light, Visible-light irradiation, Water splitting reactions, Vanadium metallographyPhotoelectrochemical ActivityP-Type ElectrodeNonhydrolytic Sol-GelPerovskiteVisible Light ActiveArticle