Mehmet Can ÖzgönülMustafa Seçmen2025-10-0620179786050107371https://www.scopus.com/inward/record.uri?eid=2-s2.0-85045737738&partnerID=40&md5=981c0b9e473996253e361fea7a86278chttps://gcris.yasar.edu.tr/handle/123456789/9674This paper presents the miniaturization and improvement of a printed log periodic dipole antenna (LPDA) by using patches at the feeding point and single first order semicircles. After the design of a conventional printed LPDA on FR4 substrate to cover L-band is performed patches having 12 mm × 5 mm dimensions are placed to the feed point of the antenna. Although this modification gives same antenna size it brings considerable increase in the return-loss bandwidth up to 2.25 GHz and higher gain values up to 2 GHz at the expense of decrease in gain at about 2.4 GHz. Afterwards in order to reduce the total size of the antenna single semicircles are substituted into the dipole arms which results in 14% lateral size reduction. Besides the bandwidth is further improved between 0.9 GHz and 2.4 GHz with better return loss performance higher gain at 2.4 GHz and lower gain variation. © 2023 Elsevier B.V. All rights reserved.EnglishAntenna Arrays, Antenna Feeders, Dipole Antennas, Directive Antennas, Log Periodic Antennas, Microstrip Antennas, Microwave Antennas, Slot Antennas, Antenna Size, Feed Point, Feeding Points, First Order, Fr4 Substrates, High Gain, Iteration Points, Log-periodic Dipole Antennas, Miniaturisation, Return Loss Bandwidth, BandwidthAntenna arrays, Antenna feeders, Dipole antennas, Directive antennas, Log periodic antennas, Microstrip antennas, Microwave antennas, Slot antennas, Antenna size, Feed point, Feeding points, First order, FR4 substrates, High gain, Iteration points, Log-periodic dipole antennas, Miniaturisation, Return loss bandwidth, BandwidthConference Object